Flat Sawing
Our professional operators have years of experience in flat sawing work. We can handle jobs on concrete or asphalt, achieving cutting depths of up to 36”. Our trucks are equipped with diesel powered saws, have their own water and power supplies and carry 35- and 55-gallon water vacuums. We can perform indoor or outdoor flat sawing. For indoor sawing where ceiling heights are less than 12-16 feet and have inadequate ventilation, our 400Hz electric saws with up to 25hp motors can cut to a maximum depth of 9.5”, while limiting noise and dangerous fumes.
Our flat sawing truck are equipped with gasoline powered saws, capable of sawing asphalt or concrete to a depth of 9.5 inches; 110V core drilling equipment for up to 8″ diameter holes in addition to hand saws capable of a depth of 5″. Each truck is equipped with it’s own water/power supply, and is also equipped with both a 35 gallon and a 55 gallon water vacuum.
In addition, our shop is cable to supply these trucks with the necessary saws and blades for cutting to a maximum depth of 18.5 inches.
For indoor work, where ceiling heights are less than 12 to 16 feet and where there is not adequate ventilation for gasoline powered saws, we have available 400 Hz electric saws with up to 25 horsepower motors. These electric saws can cut to a maximum depth of 9.5″ and also avoid the noise and carbon monoxide fumes.
- We service our customer with quality service. Speak with an expert.
- 661.589.1001
